Custom printed · for coffee bars, boba shops, and juice counters

Paper Cups

Your cup. Your logo. Printed here. Printed in the USA. Hot coffee cups and cold cups printed with your own wrap, so the cup that leaves your counter carries your name, not a supplier’s.

Starts at

From $0.12 / pc

one color, at the minimum

Order minimum

10 cases

any mix of sizes

Lead time

3–4 weeks

from approved artwork

Every size, drawn to one scale from the measured cup.

Price your run

Pick a size and the drawing, the lid and the price follow. Your account manager confirms it in writing, plus shipping to your address.

61 mm ⌀ 62 mm

Single wall hot cup, 4 oz

62 mm (2.4″) across the rim · 61 mm (2.4″) tall

62 mm rim — takes 4 oz dome lids

From, per piece

$0.12

Order minimum
10 cases

Per-piece price at the order minimum, one color, before shipping. Each size is priced on its own; a one-time plate charge per color is added at quote.

Which line?

Same sizes, same lids across the lines; the board is what changes. Pick one and the price above follows.

bare outside thicker board coated inside

Single wall hot cup

  • One board, coated on the inside; the outside stays bare so it sheds heat.
  • Up to 4 print colors.
  • Add a sleeve for long holds.

Best for Everyday hot coffee, tea and drip.

outer shell air gap inner cup

Double wall hot cup

  • An outer shell with an air gap — comfortable to hold without a sleeve.
  • Same rim as the single wall, so the same lids fit.
  • Up to 4 print colors.

Best for Hot drinks that are held a while.

coated outside thinner board coated inside

Paper cold cup

  • Same shape as the single wall at each size — the same lids fit.
  • Thinner board, coated on both faces, because a cold drink sweats.
  • Up to 3 print colors.

Best for Iced coffee, boba and juice.

Wall sections are schematic, not to scale.

Where your wrap prints

The print area for each size is on the sheet below in millimetres, flat. Send a vector file and we return a proof on this exact shape before anything runs.

Illustration of the printable wrap area. The mark shown is a placeholder, not a customer.

Paper Cups: full size sheet

Every size we print, measured. Diameters are across the rim, print area is the flat wrap before it is formed, and the case pack is what ships on the pallet.

Paper Cups: capacity, top diameter, height, print area and case pack for every size
Product lineSizeTop diameterHeightPrint areaPer case
Single wall hot cup 4 oz 62 mm (2.4″) 61 mm (2.4″) 163 × 61 mm 1,000
Single wall hot cup 8 oz 80 mm (3.1″) 90 mm (3.5″) 194.5 × 96.5 mm 1,000
Single wall hot cup 10 oz 90 mm (3.5″) 95 mm (3.7″) 223 × 97 mm 1,000
Single wall hot cup 12 oz 90 mm (3.5″) 113 mm (4.4″) 222.5 × 113.5 mm 1,000
Single wall hot cup 16 oz 90 mm (3.5″) 136 mm (5.4″) 224 × 138 mm 1,000
Single wall hot cup 20 oz 90 mm (3.5″) 162 mm (6.4″) 230 × 165 mm 500
Single wall hot cup 24 oz 90 mm (3.5″) 180 mm (7.1″) 226 × 195 mm 500
Double wall hot cup 8 oz 80 mm (3.1″) 90 mm (3.5″) 217 × 82 mm 500
Double wall hot cup 10 oz 90 mm (3.5″) 95 mm (3.7″) 237 × 86 mm 500
Double wall hot cup 12 oz 90 mm (3.5″) 113 mm (4.4″) 236 × 102 mm 500
Double wall hot cup 16 oz 90 mm (3.5″) 136 mm (5.4″) 238 × 127 mm 500
Double wall hot cup 20 oz 90 mm (3.5″) 162 mm (6.4″) 240 × 137 mm 500
Paper cold cup 12 oz 90 mm (3.5″) 113 mm (4.4″) 222.5 × 113.5 mm 1,000
Paper cold cup 16 oz 90 mm (3.5″) 136 mm (5.4″) 224 × 138 mm 1,000
Paper cold cup 20 oz 90 mm (3.5″) 162 mm (6.4″) 230 × 165 mm 500
Paper cold cup 24 oz 90 mm (3.5″) 180 mm (7.1″) 226 × 195 mm 500

Specifications

Every value on this sheet is confirmed in writing by the supply chain before it is published. Anything not listed is quoted with your order.

Paper Cups specifications
SpecWhat it coversValue
Cup sizes Hot cup sizes available for a custom run. 4, 8, 10, 12, 16, 20, 24 oz (single wall); 8, 10, 12, 16, 20 oz (double wall)
Wall construction Single, double, or double-wall kraft. Availability differs per size. Single wall 4–24 oz; double wall and kraft double wall 8–20 oz; PLA-lined single wall 10, 12 and 16 oz; paper cold cups 12–24 oz
Lid compatibility Lid types that seat on each cup size. Dome sipper 4–8 oz and 10–24 oz; hinged-tab 8 oz and 10–24 oz; flat 10–24 oz (80 mm at 8 oz, 90 mm at 10–24 oz)
Print colors Spot colors per run. 1 to 4 spot colors
Case pack Cups per case. 1,000 per case through 16 oz; 500 per case at 20 and 24 oz and for double wall
Material and liner Board weight and liner type. Hot cups: paperboard with a water-based barrier coating, no plastic liner. Cold cups: a thinner board, PE-coated on both faces, because the outside of a cold drink sweats
Sleeve compatibility Which sleeve sizes fit each cup. 90 mm sleeve fits 10–24 oz

Hold the stock before you commit

The free sample box ships unprinted paper cups in the sizes you are weighing, with the written price ladder for those sizes. No card, no account.

What is in the box →

In the box

  • Unprinted stock

    The actual cups in the sizes you are weighing: the same stock a print run uses.

  • A printed wrap sample

    So you can see how ink sits on that stock before your own artwork is on it.

  • The written price ladder

    The per-piece price at every tier for the sizes you asked about, on paper.

  • A spec sheet

    Sizes, lids, case packs, and print areas for what is in the box.

Questions we get

Do you print hot and cold cups on the same order?

Yes. One order can mix sizes and cup types. Pricing is calculated per size, because each size is its own die and its own wrap.

What artwork do you need?

A vector file (AI, EPS, PDF, or SVG) is ideal. If all you have is a raster logo or a photo of your sign, send it and we will tell you honestly whether it will hold up printed at cup scale, and what would need redrawing.

Can I see a printed cup before committing to a full run?

That is exactly what the free sample box is for: unprinted stock in the sizes you are considering, so you can check the cup itself against what you buy today before we ever discuss a print run.

Do you do the artwork if I do not have a designer?

Tell us on the form. Layout support and what it involves is one of the things we confirm on the first call rather than in a footnote.

What happens after I request a quote?

You get a written quote with the per-piece price at each tier, the setup involved, and a lead time, before any deposit and without a subscription, an account, or a portal login.

Get paper cups in your hands this week.

Free sample box, unprinted stock in your sizes, plus the written price ladder. No card and no account.

Get a quote

or email [email protected]